Worcester danesmoor 20/25

[Bunker]

Stani, does this mean you made the schoolboy error of not noting their positions while taking them out lol? I've done that. Or do you think they were put back in wrongly?

 

[Bunker]

Just had a thought, that's not the one where they all hang around the edge of the chamber is it? I'm having vague recollections. Or if its just one like a 4 sided tray, your not talking about the target plate that hangs off the back for the burner to fire on?

 

[WHPES]

Inter 11 normally 140psi 4mm spark gap, 10mm from electrodes to centreline, PL1 or PL10/4 blast tube, 40-42mm from nozzle tip to end of blast tube.

 

[stani]

Stani, does this mean you made the schoolboy error of not noting their positions while taking them out lol? I've done that. Or do you think they were put back in wrongly?

No, unusually not, the reason I went was firing for 5 minutes and then lock out, the trays were all in the bottom of the chamber due to severe winds, which had disturbed them, hopefully it's going to be a new boiler, fingers crossed. I have put the, back at angles as most Mis show and it fires and works, 0-1 on smoke but had forgotten to put Fga in van as it was a call out . Just needed clarification to put my mind at ease that they were in the right place.

 

[stani]

Just had a thought, that's not the one where they all hang around the edge of the chamber is it? I'm having vague recollections. Or if its just one like a 4 sided tray, your not talking about the target plate that hangs off the back for the burner to fire on?

Not the target plate but definitely the baffles which are set like alternating steps, 1 angled to front, then the next angled to the rear etc.

 

[stani]

Just tried thanking myself, been a long day.lol