Search the forum,

Discuss vailant boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

eddiebrown424

Hi All,

If I isolated a boiler (combi) and opened the cold feed how much water approx should I expect to drain. Its a vaillant its a turbomax and the customer has no water comming out the hot tap.

Thanks in advance

Eddie
 
Sorry
Don't understand the question?
Isolated boiler and opened cold feed?
 
Sorry
Don't understand the question?
Isolated boiler and opened cold feed?
 
I think he's saying if he isolated the cold supply to the combi then opened a hot tap how much water would come out .
Depends which tap your opening if that's the question
 
If no water out of hot tap ! then something is blocked in boiler or valve under boiler is closed off what type of filling loop is fitted ? if type with 2 grey taps make sure they are both closed
 
Status
Not open for further replies.

Reply to vailant boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
219
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
2
Views
151
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
254
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
201
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock