Search the forum,

Discuss Training Centre in York Closure? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

WHPES

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,835
I was due to start a new course at a training company in York called MPK Associates, however since December, the company now appears to have ceased trading and as such I am quite seriously out of pocket. No statements have been made or notices posted. If anyone knows anything about this, I would appreciate it if you can forward details to me including any names and contacts of administrators or receivers I can contact about my loss.

Thank you.
 
sorry to here about your loss.if you do recover your fees i can recomend ppl at york i trained there last year and they have some very imformative and helpfull staff
 
MPK Associates. OFTEC, BPEC and City and Guilds said that the mail was getting returned to them. The local plumbers merchants has outstanding invoices unpaid and the place is all shut up. I checked with Companies House and they have not yet registered as insolvent but their accounts are due for submission before the end of the month.
 
Status
Not open for further replies.

Reply to Training Centre in York Closure? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
265
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
481
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
190
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock