L Lothian8 Messages 7 Sep 9, 2017 #1 Hi guys I'm in the process of replacing cloakroom toilet suite and unearthed these isolating valves. I was expecting a traditional compressing fitting. Any idea how to remove these? Thanks Craig
Hi guys I'm in the process of replacing cloakroom toilet suite and unearthed these isolating valves. I was expecting a traditional compressing fitting. Any idea how to remove these? Thanks Craig
ShaunCorbs Super Moderator Staff member S. Mod Plumber Gas Engineer Subscribed Messages 34,370 Solutions 2 Sep 9, 2017 #2 Chop them out (cut the pipe just below the valve) There the old pushfit type
L Lothian8 Messages 7 Sep 9, 2017 #3 Thanks. I was guessing that would be the case but hoping not as the other pipe is in an awkward spot. Cheers
Thanks. I was guessing that would be the case but hoping not as the other pipe is in an awkward spot. Cheers
Harvest Fields Esteemed Plumber Gas Engineer Subscribed Messages 10,442 Sep 9, 2017 #4 hideous fitting
king of pipes Esteemed Plumber Gas Engineer Subscribed Messages 6,157 Sep 10, 2017 #5 Isolate the supplies and cut below the valves replace with new WRAS approved ones cheers kop.