Search the forum,

Discuss motorised valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
149
can anyone tell me what the flow rate difference is between a 22mm and 28mm 2 port honeywell zone valve
 
Incase you need assistance interperating the graph on the above honeywell pdf. This should help
Link
https://www.google.co.uk/url?sa=t&s...DBaEBh9k0asm7wJeg&sig2=QYbH01hGQEO_JAF9Ji8vJw
Definition of cv and kv
The flow coefficient - Cv - and the flow factor - Kv - are commonly used to specify the capacity of control valves.

Flow Coefficient - Cv
It is often convenient to express the capacities and flow characteristics of control valves in terms of the

Flow Coefficient - Cv
The flow coefficient - Cv - is based on the imperial units system and is defined as:

the flow of water through a valve at 60 oF in US gallon/minute at a pressure drop of 1 lb/in2
The flow coefficient is commonly used in the U.S.

Flow Factor - Kv
The metric equivalent of the flow coefficient - Cv - is based on the SI-system and is called the

Flow Factor - Kv
The flow factor - Kv - is defined as

the flow of water with temperature ranging 5 - 30 oC through a valve in cubic meters per hour (m3/h) with a pressure drop of 1 bar
The flow factor is commonly used outside U.S.
 
Last edited:
Took me 12 secs so what, I am getting past it, wear my fingers out hey
The internet has the information. That doesnt always mean it will be easy to find or once you have found it that you will understand it. In this instance it was easy to find. The Understanding has yet to be seen.
 
The internet has the information. That doesnt always mean it will be easy to find or once you have found it that you will understand it. In this instance it was easy to find. The Understanding has yet to be seen.


pretty easy to understand too solutions
 
Status
Not open for further replies.

Reply to motorised valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
210
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
239
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
226
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
224
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
181
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock