Discuss motorised valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
149
can anyone tell me what the flow rate difference is between a 22mm and 28mm 2 port honeywell zone valve
 
Incase you need assistance interperating the graph on the above honeywell pdf. This should help
Link
https://www.google.co.uk/url?sa=t&s...DBaEBh9k0asm7wJeg&sig2=QYbH01hGQEO_JAF9Ji8vJw
Definition of cv and kv
The flow coefficient - Cv - and the flow factor - Kv - are commonly used to specify the capacity of control valves.

Flow Coefficient - Cv
It is often convenient to express the capacities and flow characteristics of control valves in terms of the

Flow Coefficient - Cv
The flow coefficient - Cv - is based on the imperial units system and is defined as:

the flow of water through a valve at 60 oF in US gallon/minute at a pressure drop of 1 lb/in2
The flow coefficient is commonly used in the U.S.

Flow Factor - Kv
The metric equivalent of the flow coefficient - Cv - is based on the SI-system and is called the

Flow Factor - Kv
The flow factor - Kv - is defined as

the flow of water with temperature ranging 5 - 30 oC through a valve in cubic meters per hour (m3/h) with a pressure drop of 1 bar
The flow factor is commonly used outside U.S.
 
Last edited:
Took me 12 secs so what, I am getting past it, wear my fingers out hey
The internet has the information. That doesnt always mean it will be easy to find or once you have found it that you will understand it. In this instance it was easy to find. The Understanding has yet to be seen.
 
The internet has the information. That doesnt always mean it will be easy to find or once you have found it that you will understand it. In this instance it was easy to find. The Understanding has yet to be seen.


pretty easy to understand too solutions
 
Status
Not open for further replies.

Reply to motorised valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have tried hard to get similar to the first class satchwqell /Sunvic SML type revolving type valves instead of the quite short lived spring...
Replies
0
Views
402
Replies
2
Views
856
Deleted member 120897
D
Can anyone please tell me where I might purchase a 90° bend 15mm x 22mm Isolating Valve Thanks and Regards. Hugh
Replies
2
Views
274
I have a CH circuit on a 2 way zone valve. It’s a long circuit with 15 rads on it but rather than shutting down the last 5 rads in the circuit...
Replies
0
Views
347
Hi I have a 4 zone / 7 loop UFH system. 2 zones (4 loops) always get hot when the system is on when the zone thermostats and actuators are...
Replies
14
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock