Discuss Low pressure at hot tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 1,241
Cheers Mik, but in cALCULATIONS, this would not be 98.1m2 to the speed of the cold feed! NO?
- Status
Reply to Low pressure at hot tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Looking for any ideas to help.
I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine).
A week ago I reset the air...
Pumps and low pressure
I moved the bathroom to the back the house (next room) upstairs. I put in two pumps because low pressure water area. One...
I’ve lost the pressure from the outside tap. It was working fine. I have checked the washer on the outside tap and the inside stop valve seen in...
