- Messages
- 10,444
He cannot legally take the case of the boiler and integral pump no longer work like that.
Discuss Hot flow and return pipes, hot upstairs rad but cold rads downstairs in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Most of the new valiant boilers you can on the boiler Display give so many KW to heating and hot water just check this . if the heating has not been used in summer most times the pump gets stuck free this up with big screwdriver I have also seen the nut behind the chrome screw on pump turn but the impeller stays put? As with Most of the new Boilers Valiant. Glow- worm. Worchester 30 CDI you can Map the Pump you should look at this as well . I think you should be ok if you are only touching the wet side of system To put it another way if AAV went in boiler and water flooding every were and in order to stop this you could turn off isolation valves I know what I would do
That would be awesome mate. It’s always nice to get some feedback. It’s easy to forget us once it’s been fixed. UNTIL NEXT TIME
Awesome news mate. Glad it is sorted and you saved money. It’s nice to get feed back, it doesn’t happen often. As you saved £££s I hope that you gave him a drink?
Reply to Hot flow and return pipes, hot upstairs rad but cold rads downstairs in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.