Recently moved into North Walsham area. (Norfolk) The house has a Trevi shower that isn’t working properly. The hot is overpowered by the cold? Two plumbers so far have had a look but no success. Need a plumber with experience of these showers as they obviously have very specific issues that make them difficult to fix?
Discuss Help! Trevi shower problem! in the USA area at PlumbersForums.net
Yes we think it is a Trevi Boost shower. Don't know if photo will help. There is nothing on the unit to help identify it.
Attachments
exedon2
Esteemed
- Messages
- 978
The trevi boost is tank feed hot and mains cold it works on a venturi using the higher pressure cold to 'accelerate ' the hot. You will need your hot water to be at at least 60 c to have a hope of a warm shower.
Should say I've taken a few out and replaced them with something more conventional.
Should say I've taken a few out and replaced them with something more conventional.
Reply to Help! Trevi shower problem! in the USA area at PlumbersForums.net
Similar plumbing topics
I recently had a plumber come over to look at a badly leaking shower head. As best I can recall, he described the problem as a crack in the bridge...
I have an Arteform shower valve in my bathroom - top lever for the main shower head, middle for the handheld hose and bottom is the thermostatic...
- JezBond
- DIY Plumbing Forum
Hi all, I have an issue with our shower's hot water. The shower is operated using two separate taps for cold and hot water. When the hot water tap...
I'll start this by saying I'm hoping to sort this by diy / minimal professional help as I'm a very tight budget!
I've got a walk-in shower in a...
So I bought my first flat recently (am in UK) and in a bit of a pickle as the bathroom has turned up lots of problems that weren't picked up by...
