Search the forum,

Help Please, Salamander Accubust Water Pump

Post new thread

Discuss Help Please, Salamander Accubust Water Pump in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Zoe100

Zoe100

Messages
4
Help pls, I’ve got a Salamander Accubust water main pump it has an in & out & third port for an accumulator can I blank off the accumulator port & use it as a mains water pump without an accumulator? TIA
 
I would give Salamander technical guys a call on Monday to check. However my understanding is that the pump is designed to recharge the accumulator and also offer a mains boost of 12lpm once the accumulator has been discharged. So in theory yes it would work but 12lpm is still quite low on a system and I would consider other options if your mains is already below this.
 
No not unless you use a cold water tank as you can’t pump the mains above 12lpm
 

Reply to Help Please, Salamander Accubust Water Pump in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
148
John.g
J
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
196
ShaunCorbs
ShaunCorbs
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
oz-plumber
O
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
dreikher
dreikher
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Forum for Electrical Advice
Electrical Advice | Electricians Blog
Tiling Advice
Electrical Blog
Tilers Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock