Discuss fitting 40mm pipe into soil stack using strap boss question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Same - different angle and some floor boards removed though

I`m not getting in to an argument with you as camera angles can alter a picture however it looks different to me.

I`m out.
 
BTW I'm not a plumber
Can't remove T without huge disruption.
The strap should fit:
http://www.NoLinkingToThis/p/floplast-sp319g-strap-boss-grey-110mm/93635
If it can't be done this way I have an alternative plan.

Still won't fit
 
Judging by picture, which might be deceiving?
You can't attach another pipe there because of the danger of cross flow.
 
Status
Not open for further replies.

Reply to fitting 40mm pipe into soil stack using strap boss question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Trying to connect up new 40mm waste into the old soil stack (which would be an absolute pain to remove), it's all Osma pipe, from the 70s...
Replies
10
Views
1K
Hey all, I’ve got a new section of stack fitted but when I fitted the strap boss I was too keen to test it and it now slightly leaks where it...
Replies
4
Views
939
G
Morning everyone. Got an issue with an internal soil stack boss strap failure. The boss strap had been sealed originally with silicon which has...
Replies
1
Views
1K
Hi, I have an opening on the 'manifold' (I think that's what its called) on my soil pipe. It appears to be a non-standard size - about 51mm...
Replies
9
Views
859
Hi Everyone, Can anyone help? I have been searching but with no luck. I am trying to fit a Duravit shower trap which has a 50mm outside...
Replies
15
Views
1K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock