Search the forum,

Discuss Deck Mixer Tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Spiderman

I have a kitchen Deck Mixer Tap which continues to drip water or stay on after usage and the only way I can stop the water coming out is to lift the hot leaver upwards. Can anybody tell me how to fix this problem and what washer needs to be replaced or whether it has a cartridge instead. it dosent matter whether I use the cold or hot tap it will only stop leaking when I lift the hot lever upwards
 
Hi spiderman. If your deck mixer is quarter turn to put on or off then it's a ceramic dusc cartridge that it needs and there's so many different types n styles with no indication written on them to know which ones you need . Best thing to do is switch water off and remove the insert to have a look . Then scour the Internet in places like this.

Tap Spares
 
Status
Not open for further replies.

Reply to Deck Mixer Tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
109
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
196
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
319
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
295
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
117
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock