- Messages
- 4,744
- Thread starter gastec
- Start date
- Replies 21
- Views 47K
- cheap cold drayton heating hot quality radiator radiator valves thermostat thermostatic valves
Discuss Best thermostatic radiator valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
C
Ch4 plumbing
I fit a lot of Drayton TRV 4's, but the Altecnic valves are a good budget brand, no frills but do the job required well.
- Status
Reply to Best thermostatic radiator valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Newest Plumbing Threads
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 6
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 2
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 4
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2