Discuss ECV letby on boiler install job in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jaydebruyne

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,718
hi peeps,

Just tested the gas pre boiler install and the ECV is letting by. Obv I won’t know if there’s a drop on the system until the ECV is replaced, do I halt the install until this is done or carry on cuttinggas pipe so I can take the oldboiler off?

Cheers
 
Have you phoned it in ?
 
Anyone ever replaced a Keston with a new Keston and joined into the existing twin flue?????
 
Yea needs to be the right stuff, but I think you have to pressure test the flue to make sure it's sound
 
Yea needs to be the right stuff, but I think you have to pressure test the flue to make sure it's sound
How do you pressure test it? Sean can you give me a bell please as I need to order the Keston in next 30 mins
 
How do you pressure test it? Sean can you give me a bell please as I need to order the Keston in next 30 mins

Air test it like drains
 
Where do they exit on the property?
 
The roof I think as can’t see them coming out the external walls

Need to check it's supported and terminal is correct etc

Also need to put your bung in it
 
Need to check it's supported and terminal is correct etc

Also need to put your bung in it
Yeah ... jobs been a nightmare today!
Just trying to think where I could get a pressure test kit?????
 
upload_2018-2-15_17-9-52.jpeg


Nothing like this ?
You must be able to make something up?
They're both open ended so it doesn't need to be a big pressure just as Shaun said, a quick drain test will do.
 
I don't know the cut off times but you can choose delivery by 10 the next day.
 
You get all the fun jobs jay

How's self treating you
 
You get all the fun jobs jay

How's self treating you
Ah can't complain mate, busy which is great.. Business is going well. Basically all I got done today was getting the old boiler off the wall and Cadent fitting a new ECV!
How about you Shaun, how's things?
 
That's good and you get some days like that

Just have to move on and do something else like hang the boiler and sort the flue out or flush the system etc

Very good slowly ramping up the kids are off so the schools are starting to pick up
 
That's good and you get some days like that

Just have to move on and do something else like hang the boiler and sort the flue out or flush the system etc

Very good slowly ramping up the kids are off so the schools are starting to pick up

Would have hung the boiler but I ordered the wrong one (can't return it either), by the time I wasted the day was too late to start anything else.. *shrug* oh well!

You do a lot of commercial work?
 
Wrong one ? Lol never done that before (had one in the wrong box)

And can do comes in waves (they normally leave it till the very end and it's falling apart)

:D
 
Wrong one ? Lol never done that before (had one in the wrong box)

And can do comes in waves (they normally leave it till the very end and it's falling apart)

:D
Yeah ordered a heat only and needed a system :mad::eek::D
 
Just stick an expansion vessel and prv somewhere else
Already has an external one.. I’m hoping I can fit the Keston so I don’t have to order another Baxi - either way I’m stuck with a heat only til a custard needs one
 
Baxi 400 ?
 
Not too bad guess you'll have to get the misses a gift for storing it inside :D
 
Well jay how did it go ? And did the delivery arrive on time
 
Well jay how did it go ? And did the delivery arrive on time
Delivery arrived at 10am!! Flue was leaking so had to fit a Baxi in the bathroom (different location!) had to climb out the loft window and up the pitch roof to the flat roof to bung the flue.. 2 years ago I was a nervous wreck going up a ladder 2m high :D

E87F6ED1-A5D5-46A1-9908-6311162C3564.jpeg
 
:D looks good jay was the old one leaking much?
 
:D looks good jay was the old one leaking much?
Yeah, air pressure went from 100ml to zero in about 30 seconds repeatedly.. for peace of mind I tested my equipment on a single piece of 2” and it was solid..
 
Status
Not open for further replies.

Reply to ECV letby on boiler install job in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a "Firebird Envirogreen Condensing Combi Oil Boiler 26kW" a part has went and I can't find it anywhere, I was at every plumbers merchant...
Replies
2
Views
435
Hi, i've got a job with a Vaillant Ecotec 630 system boiler, and i don't know the full history but the house has definitely been extended...
Replies
2
Views
609
Hi Can you help me determine if my new Navien lcb700 lsx is working as expected? I got the Navien oil boiler installed to replaced an old...
Replies
22
Views
2K
Hi All, We have finally decided after a bit of a persuasion to have installed a utility room in our garage that currently houses our oil boiler...
Replies
7
Views
910
My Grant combi oil boiler is giving me quite a headache at the moment. When I returned home last Friday I'd no heating or hot water. An engineer...
Replies
3
Views
609

Newest Plumbing Threads

Back
Top