Discuss Landlord safety check v Full service in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

GreenArmy

Is a landlords safety check the same as a full service i.e.....
Does the Landlords Safety Check require the boiler to be stripped and heat exchanger and burner to be cleaned as a full service would?
Basically im asking if there is a big difference (or any difference) between a Landlords Safety Check and a Full Service?
 
I have looked at all that is relevant for my line of work, including risk assessment, which is a main part of ACS. Something you have clearly not under your belt.
Now you come up with a cooker that is not yours, and signs of scorching; a far cry away from the subject of removing a fire that belongs to a tenant to inspect the chimney.
 
Last edited by a moderator:
Bengasman, what type of work are you doing? you need to have a wee read at the notes printed inside the cover of the CP1 book ( i swear to God i had been doing services for years before i notice the guidence notes inside the front cover:eek:) on what/how to fill the cert in, and also a wee look at the gas regs/requirements for what you are doing
I do my best to limit my work to central heating repairs for home owners. I'll do other things for good clients, and as little as possible for landlords. I only work for landlords if I know them already, or if they are referred to me by people I know and trust.
I have one generic gas cert bloc that is at least 4 years old, and did not come with any guidance notes.
 
Kirk, we had our CP12s customised to include the words boiler, fire, and cooker pre-printed in the appliance box. So now the engineers write ELEC next to the relevant appliance and scratch through the rest. Similar to what you were doing.

Ben, we supply a boiler which by law we are obliged to check. It is no different than a flue we supply, regardless of whether it's connected to our fire or a tenant's. We have a duty of care ensure the things we provide are safe; the law says we are obliged to check it.

It's not unknown to see forums full of engineers complaining about cheapskate landlords putting tenant's safety at risk. This, however, is the first time I've seen one complain we do too much and it's none of our business.

I suggest we agree to disagree, particularly as you have a penchant for peppering your debates with insults. And for the record, I don't just sit behind a desk all day and it is incorrect to assume I am 'without any relevant real life experience'.
 
Kirk, we had our CP12s customised to include the words boiler, fire, and cooker pre-printed in the appliance box. So now the engineers write ELEC next to the relevant appliance and scratch through the rest. Similar to what you were doing.

Ben, we supply a boiler which by law we are obliged to check. It is no different than a flue we supply, regardless of whether it's connected to our fire or a tenant's. We have a duty of care ensure the things we provide are safe; the law says we are obliged to check it.

It's not unknown to see forums full of engineers complaining about cheapskate landlords putting tenant's safety at risk. This, however, is the first time I've seen one complain we do too much and it's none of our business.

I suggest we agree to disagree, particularly as you have a penchant for peppering your debates with insults. And for the record, I don't just sit behind a desk all day and it is incorrect to assume I am 'without any relevant real life experience'.

good reply - good idea of the pre printed cp12's to suit your particular needs
 
Last edited by a moderator:
Please be advised this thread is being closely monitored

Again I would request all posts are kept on topic and refer to new opinions or comment on previous post content and not on the poster ie

NO PERSONAL REMARKS OR DIGS ,there is no need for it and it is not productive

This, in the main is a good thread, with good discussion and think we can all agree ,we do not want spoilt by a few, this is not going to happen


Thank you
 
Last edited by a moderator:
I like the idea of noting an electric cooker if fitted, if gas supply behind it, am surprised duel fuel cookers are never mentioned I state gas top hob, electric oven and grill, were applicable

I note any gas appliances that has been previously capped off and state ''not to be reconnected and used'' without further inspection

Do not really like the idea of unused gas appliances being just capped and left in position,especially in cheaper maintained properties were heating may be poor,it is just asking someone to reconnect a dangerous appliance for some extra heat ect,alway make note that appliance should be removed

Also now I have started noting the actual size/type of ventilation if required and were located

Must admit now that I come across less open flued boilers, making it more manageable ,thinking taking pics of installation

Also as I have said before ,if I do a gas check on a opened flue appliance, I insist they have a co2 alarm placed near appliance, as cost of these units so low now and once explained to l/l have not had any who really kick up any fuss

Would add that these units would be really cheap for the gas suppliers to purchase in bulk and would like to be sent out/or given out via all gas engineers to people free who had open flue appliances,like energy saving light bulbs and condoms are !
:)
 
Last edited by a moderator:
Would add that these units would be really cheap for the gas suppliers to purchase in bulk and would like to be sent out/or given out via all gas engineers to people free who had open flue appliances,like energy saving light bulbs and condoms are !
:)



this is a good point - not sure the gas suppliers would go for it - but i dont see any reason for the owners of the property to supply these for open flued appliances if it doesnt cost too much.
 
Sometimes it's difficult to get tenants to do away with their old appliances. Very first service I did, a lovely old boy in his 80's had a cooker that had been ID'd about six years ago. The thing was in pristine condition--a museum piece! I offered to have it carted away, but bless him, he said it was his mother's cooker and had sentimental value. Fortunately, it was cut and capped.
 
Ben, we supply a boiler which by law we are obliged to check. It is no different than a flue we supply, regardless of whether it's connected to our fire or a tenant's. We have a duty of care ensure the things we provide are safe; the law says we are obliged to check it.

A boiler is a gas appliance, and as such, the landlord is obliged to maintain it, and have it annually inspected.
A chimney is not an appliance, and if the tenant is using that for his own fire, than HE has a legal obligation TO THE LANDLORD to :
Ensure that the appliance is installed legally and safely.
Maintain it to a safe standard.

Removing a fire to have a look at the chimney is pointless because:

A visual inspection of a small part of the chimney will not give a conclusive picture.
It does not constitute a proper test/inspection
To do that properly, the fire has to be in place.
 
Last edited by a moderator:
A boiler is a gas appliance, and as such, the landlord is obliged to maintain it, and have it annually inspected.
A chimney is not an appliance, and if the tenant is using that for his own fire, than HE has a legal obligation TO THE LANDLORD to :
Ensure that the appliance is installed legally and safely.
Maintain it to a safe standard.

Removing a fire to have a look at the chimney is pointless because:

A visual inspection of a small part of the chimney will not give a conclusive picture.
It does not constitute a proper test/inspection
To do that properly, the fire has to be in place.

No Ben its not just looked at it has a smoke test to ensure it pulls correctly to clear any products ofcombustion that come from the tenants own 'appliance'
 
When i do gas saftey checks i always asked has the boiler been serviced in the last 12 months if no,then i say that it has to be serviced too and it will cost X amount

if it has been serviced i ask for the receipt of previous engineer then i just gas safety check

if they have not got one and say it has been serviced,i have learnt all customers tend to be not so truthful so i say regardless it will still need to be serviced to satisfy me and i know that it has been done properly
 
Status
Not open for further replies.

Reply to Landlord safety check v Full service in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock