Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Best 90mm shower waste in the USA area at PlumbersForums.net

Messages
74
Looking for a top access 90mm shower waste, what's a good quality one, also want it sealed and usable as quickly as possible, do you install with silicone added to the seal top and bottom and if so which is the quickest curing silicone.
 
do you install with silicone added to the seal top and bottom and if so which is the quickest curing silicone.

Follow the manufacturers recommendations, Mcalpine will tell you what to apply and where. As for quickest, not sure, but they usually recommend a neutral curing silicone, which usually cures in 24 hours.
 
Last edited by a moderator:

Reply to Best 90mm shower waste in the USA area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
205
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
473
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
293
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
228
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
541
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock