Search the forum,

90mm

The Canon EF 28–90 mm is a full frame SLR zoom lens, also often included as a kit lens with Canon EOS film cameras.
The maximum aperture is f/4 at 28mm, reducing to f/5.6 at 90mm. When set to 90mm, this will create a moderate amount of background blur for portrait photography.
There are several versions of this lens. They all share an identical optical design of 10 lenses in 8 groups and 5 aperture petals. Versions I and II were available with either a DC auto focus motor or an ultrasonic USM motor. All other differences are purely cosmetic. All versions had plastic lens mounts and barrels. Some were available in silver or black colour.The lens is a very lightweight design, and has fast auto focus even without USM.
Image quality suffers, though, particularly between 28–35mm and 80–90mm, and there is heavy vignetting when used wide open.
For digital EOS cameras with APS-C sensors, the EF-S 18–55mm lens covers the same focal length range. This is due to crop factor. EF-S lenses only work with Canon 1.6x crop cameras, which results in an angle of view roughly equivalent to that of a 29–90mm lens on a 35mm camera. Like the 28–90mm, the 18–55mm is also a kit lens.

View More On Wikipedia.org
  1. P

    Shower waste hole not quite big enough for 90mm shower trap

    I attended a customers house to fix a reported leak from their shower waste. Turns out there was a split in the trap. Straight forward I thought and got a standard 90mm trap from the van. Turns out the hole in the shower base isn't big enough to fit the top section by the width of the thread on...
  2. S

    Are all 90mm shower wastes compatible?

    Looking at using the Mira Flight Safe shower tray, which comes with a badged Virquin Twisto 90 trap. Just checking the reviews for this trap and they are generally terrible and so I am considering alternatives, as there is no possible adjustment in piping once the tray is plumbed in i.e. if I...
  3. T

    Alternative to Twisto 90mm?!

    Hi. Hoping to get some help finding a better alternative to a Twisto 90mm shower waste that I’ve damaged while trying (foolishly) to clean. The model I have attaches with a round (rather than square) and has a square 135mm grate. Grey ring and seal look damaged, really hoping I don’t need to...
  4. S

    Shower trap pipe fall

    Just wondering what kind of fall you would expect in the waste pipework for one of these modern low profile trays with a 90 mm trap? I’ve seen 15 mm / meter mentioned on this website, but I am not sure if that is suitable for high flow traps? I am considering the current pipework as seen in the...
  5. R

    Best 90mm shower waste

    Looking for a top access 90mm shower waste, what's a good quality one, also want it sealed and usable as quickly as possible, do you install with silicone added to the seal top and bottom and if so which is the quickest curing silicone.
  6. C

    Limited options for adding a boss to 90mm cast iron stack

    Hello, I have the exact same issue as this chap had 4 years ago, however I am unable to post on that thread and no solution was ever arrived at (Cast Iron Boss for 40mm waste - https://www.plumbersforums.net/threads/cast-iron-boss-for-40mm-waste.89358/). I have already read a lot of threads on...
  7. P

    HepvO and Wirquin 90mm Slim Shower Waste (Waterless Membrane) question

    I'm in the process of revamping a bathroom. At the moment it contains a toilet, basin and bath with an overhead shower. The basin and toilet share a common waste pipe which feeds into the soil stack behind the toilet. The soil stack is internal and boxed behind a stud wall in a corner and has...
  8. S

    90mm Geberit spigot into McAlpine WC connector - a bit baggy

    Hello Geberit WC frame has a spigot outlet as per picture [frame removed for clarity!] with a 90mm OD. Fits rather baggy in the McAlpine WC connector that has a quoted inlet size of 97-107mm. The seal measures 85mm across and does seal the joint albeit not very tightly. I would feel more...
  9. T

    90mm water mains

    The job im on at the minute has had a 90mm water mains run into the building which I need to put a stop tap and double check valve on for water board to inspect and then connect up. Its massively oversized for what its serving, 32mm would have been plenty. The biggest mdpe ive ever...
  10. W

    Are 90mm pan cons for cast iron / clay?

    As in, if you have a cast soil is that always what you want? Thanks
  11. V

    90mm ID and 110mm OD Oring

    Hello guys, I've bought a dallmer gully for a wetroom board. I need to insert it into a vertical 110mm waste pipe in a concrete floor. The Dallmer is 90mm diameter. I want to use an O ring to put on the dallmer which will seal it into the 110mm waste pipe. Can anyone recommend where I maybe to...
  12. G

    90mm cast iron

    Hi i wonder if any one can help me please ? I have to connect a toilet waste ie 100 mm into a 90mm lcc cast iron waste . I can find no adaptors do i have to change the whole stack? There is a T jct at more or less the right place in the stack if i could get my pipe to reduce into it. Thanks
  13. K

    Problem with sourcing Multikwik Straight 90mm O.D. Pan Connector

    Hello I want to get a Multikwik Straight 90mm O.D. Pan Connector MKTR12 and I tried messaging my "local representative" through the Multikwik site (no reply) and I contacted Lunns but they didnt seem to be able to source it. Any suggestions? ...Thanks...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock