Search the forum,

Vokera Unica 36 Fault Jumper Tag

Post new thread

Discuss Vokera Unica 36 Fault Jumper Tag in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

smtplumbing

Allright guys One of my mates phoned me today with a problem of a new boiler install. hes just fitted a vokera unica 36 HE, just a swap from a worcester juinor

He is getting Fault code AL55 jumper tag fault, he has remove the Mech clock and the rf stat back to the where it was I have looked up the install guide on here to try and help him but no matter what he does he is still getting the same fault. any one good with vokeras which has had this problem before. I would go to see the boiler but i am in stirling and the boiler is in edinburgh as musselburgh so i dont want to be wasting a trip.

What are your thoughts thanks steven
 
Has the jumper tags and all connections been checked on the board?
 
graham m yeah everything is fine took the screw out and checked pulled out pushed in, brand spanking out the box aswell
 
Status
Not open for further replies.

Reply to Vokera Unica 36 Fault Jumper Tag in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
291
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Lou
Lou
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
157
Stigster
Stigster
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools
TilersForums.co.uk
Tiling Advice
Tiling Tools for Beginners
Tilezine Tiling News Tile Association
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock