Search the forum,

Discuss Unusual patterns on ceiling in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
6
Hello

I am trying to find out what has caused these small circular shapes on my guest toilet's ceiling. Is it water damage or from some cleaning or steaming that was done on the wall tiles?

Thank you.

20210506_100058.jpg
 
I'd say condensation or water spray to do with the tiles being cleaned.
There's a fairly constistant space on the ceiling from the wall to the marks, that'll be the depth of the cleaning / steaming device.
 
That's a remarkable phenomenon.

My guess is that your steam cleaning left a droplet of condensation/spray at the centre of each circular mark. This then soaked into the slightly porous ceiling and then spread out transporting stain from the plasterboard outwards and depositing it at the point the water evaporated. 'Coffee mug stains' form in a similar manner.

I'd deal with it by waiting to make sure it's dry, which could take a several months, then slap on a layer of 'one coat stain stop', and then repaint the ceiling.
 

Reply to Unusual patterns on ceiling in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
149
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
207
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
153
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
250
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
244
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock