Search the forum,

Twin Shower Heads How to install Please

Post new thread

Discuss Twin Shower Heads How to install Please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
H

Harris69

i want to install a twin showerhead (hand held & rainfall) that uses a 3 way diverter, the only ones that i have seen fit to a bath thermastatic mixer. i want to fit to my electric shower water outlet instead. can this be done?
 
No you can't fit it to an electric shower, you need to have a proper shower fitted fed from either tanks or a combi.
 
Electric showers are designed to work with the head they are supplied with
 
can anyone smell burning?as said it cant be done with electric,need a combi or unvented or a gravity system
 
Status
Not open for further replies.

Reply to Twin Shower Heads How to install Please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
162
Lou
Lou
D
UK Pipes for thermostat shower fitted at different heights
Pipes for thermostat shower have been fitted at different heights. Any way of rectifying without ripping all tiles. So for clarity 15mm pipes sunk into wall behind bath. Walls have fresh tiles. Have realised as about to fit shower these pipes one is set higher than the other. If you fit a...
Replies
2
Views
201
fowlerboi
F
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
292
exedon2
exedon2
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
228
mutley racers
M
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
225
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum
Tiling Advice
DIY Talk
Plumbing Advice
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock