Search the forum,

Discuss Thermostatic valve stops in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Bernie2

I had a job to put some limit stops on some trv's, but could not get any.


So wrote to Danfos and they sent me load for free.

:):):):)
 
danfoss and myson are two of the most helpfull companies for problems like that.
ive still got dozens of freebies from both of them!!

they could teach vailaint a thing or two!!
 
danfoss and myson are two of the most helpfull companies for problems like that.
ive still got dozens of freebies from both of them!!

they could teach vailaint a thing or two!!

i've had a night out on vailant!!! all i could drink!! food and a bit of dog racing!!
 
Any body beat a week in Senegal, all paid for, my son and his wife, and about 400 others had, courtesy of the merchant and manufacturers, all they had to do was get to Nantes airport from St Brieuc, about 150 miles
 
Status
Not open for further replies.

Reply to Thermostatic valve stops in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
243
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
292
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock