Discuss Solid fuel back boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

DustyM

I have an elderly female customer who is in the middle of a house restoration. She is intending to have an old fire place removed and a period style one installed, and wishes to retain the existing (50 year old) back boiler is possible. She is panicking because she's been told by her builder that the back boiler will likely have failed due to it not having been lit for over a year (I know!) and wants me to take a look at the boiler. I have stated that I can only get a really good look at it once the existing fire place has been dismantled by her builder (although I believe it to be sound as there is not leakage from the heating system), and that she may have to be prepared to renew it if it turns out to be a sieve. Can anyone recommend a good and affordable manufacturer of solid fuel back boilers? I'm keen to get involved with this, whether it be just an inspection of the boiler to confirm that it is sound; or to replace the existing one whilst the fire place is dismantled. Thanks!
 
Back boiler that old could be on it's last legs.

I would switch it out for grant triple pass click here

Possibly one of the best back boilers that were made, 30 years and still selling says a lot.
 
The existing boiler will probably be sound if it hasn't been fired when empty but if you are thinking of a new one i agree with Pete.
Better heat output from the grant triples. Dunsley still make them too.
 
If it's being ripped to bits you might be better of changing it anyway. No good everything being put back together and six months down the line it springs a leak.
 
Grant multi pass are very good, heavy built wrap round back boilers. Very easy cleaned from the front after removing the 2 doors.
Would prefer a free standing multi fuel stove personally though, where they would suit - & there's no building around them & very efficient.
 
Last edited:
Thanks guys; I'd looked at the Grants and thought these should be ok given their reputation for other heating products. I'll keep you posted...........................:thankyou
 
Status
Not open for further replies.

Reply to Solid fuel back boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
361
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
255
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
300
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
280
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
580
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock