Riello burner pump question

[steve1]

One of the pump connections, ( the valve stem with the coil on ), has started to weep a little oil recently, is there a seal kit I can buy for the pump so as I can replace the o ring, and all the other seals. Etc.
pump part no 3008654 ( according to the boiler manual ). Probably been superseded by now.
thanx..

 

[Geyser]

You can get a new pump stem which comes with o ring 3007871 and oring for main cover3007162.

 

[steve1]

I've noticed that these can be purchased, but what I really want is a complete set of seals etc so as I can replace all the seals around the pump area.

 

[lame plumber]

waste of time as they always leak again in short shrift

 

[bright spark]

How much is a pump? Save ye some hassle.

 

[steve1]

How much is a pump? Save ye some hassle.

About £100, I was just being tight, lol.

 

[Dotty]

£100? Shop around.

You're being shaken until your teeth rattle. .....

 

[Best]

If the Riello oil pump has a few years on it, forget it & replace it. Usually well worn after about 8 years or less. If you are in the trade, £100 is a rip off for new pump. I could supply & fit one for that! Lol!

 

[steve1]

If the Riello oil pump has a few years on it, forget it & replace it. Usually well worn after about 8 years or less. If you are in the trade, £100 is a rip off for new pump. I could supply & fit one for that! Lol!

So how much for a new pump then for a fellow forum member,

 

[Dotty]

Depends. Whereabouts are you?