Discuss pumping probs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

cam

HI all my first time on here be gentile. I have a pumped shower hot & cold. all pipe work as per pump manufacturers instructions for a neg head pump. From the pump the pipe work runs up into the loft across loft and down to mixer after using shower the pump stops and starts every 5 mins untill you turn off the pump do i need air bleeds in the loft as this is the highest point in pipe runs thanks martin
 
thanks tom, the pump i have fitted has its own non return valve, im on the second pump (first went back)
 
Take it you've got auto air vents at highest point. Sounds like a small leak down stream of pump
 
Status
Not open for further replies.

Reply to pumping probs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
225
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
286
PSxxxxxx
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
464
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock