Discuss Powermax no/tepid hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

John Cotton

I have a Powermax (thermal store) boiler. When the central heating and hot water is on there is hardly any hot water at all - and when only the hot water is on there is some but its tepid at best. ANY IDEAS ????
 
has this happened over a period of time ?
 
Last edited by a moderator:
No , happened all of a sudden. Hot water comes through taps for a few seconds, then goes tepid / cold.
 
does the boiler run ok in just hw mode ?
is the pipes feeding the coil hot ?
has it got a blending valve fitted ?
 
Status
Not open for further replies.

Reply to Powermax no/tepid hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

How a thermal store boiler works! I’ve got an old thermal store boiler and I’m trying to work out how it works. From what I understand the boiler...
Replies
3
Views
519
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
221
Background 24 apartments are equipped with thermal stores of (100 to 150 litres) with immersion heater capability. Individual demand of each...
Replies
4
Views
313
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
269
The Water Board have just replaced the main water supply to our property. We have a ground floor combi boiler. The central heating system for the...
Replies
9
Views
550
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock