Old cast iron column radiators flow return-urgent help

[Unregistered]

Thanks everyone-will try the hacksaw method.

The rads have only recently been removed from buildings where I understand they were working but boiler being fitted Sun so will mention about the safety valve as I don't want to ruin (any more!) of them. Is a sealant necessary for the stop ends on the rads or just PTFE and if so whats the best thing if LSX isn't good for this?

 

[ShaunCorbs]

Thanks everyone-will try the hacksaw method.

The rads have only recently been removed from buildings where I understand they were working but boiler being fitted Sun so will mention about the safety valve as I don't want to ruin (any more!) of them. Is a sealant necessary for the stop ends on the rads or just PTFE and if so whats the best thing if LSX isn't good for this?

boss white and hemp

[video=youtube;bFXgwO9qszY]https://www.youtube.com/watch?v=bFXgwO9qszY[/video]

 

[joni os]

boss white and hemp

At times the old ways are the best ways.

.

 

[Ric2013]

boss white and hemp

[video=youtube;bFXgwO9qszY]https://www.youtube.com/watch?v=bFXgwO9qszY[/video]

That paste he's using isn't much like boss white though? The guy in the video seems to think the paste is just for lubrication. Anyone else here tried hemp without boss? It don't seal lol!

I like using Boss and hemp. Makes me feel old-school

 

[ShaunCorbs]

That paste he's using isn't much like boss white though? The guy in the video seems to think the paste is just for lubrication. Anyone else here tried hemp without boss? It don't seal lol!

It's an American vid so will be pipe dope but use boss white instead and apply like vid and it is required