Search the forum,

Main combi eco 30 pump overrun

Post new thread

Discuss Main combi eco 30 pump overrun in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

I

iceman2010

Messages
4
Hi, I have noticed recently that when the central heating, set at 60 on boiler, goes off the pump no longer overruns for the period of 3 minutes like it always has. Is this a problem? With the dhw it does the 1 minute overrun still.

Thanks.
 

Reply to Main combi eco 30 pump overrun in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
oz-plumber
O
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
262
Matt0029
M
ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
147
John.g
J
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
291
John.g
J
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
138
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Forum for Electrical Advice
UK Tiling News
UK Tiling Forum
Tiling Forums UK
TilersForums.co.uk | UK Tiling Forum - Est 2006
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock