Discuss John Lewis ceramic mixer tap washer replacement in the USA area at PlumbersForums.net
Hi I have a John Lewis kitchen mixer tap but can’t see the item name just JL. Does anyone know what replacement ceramic washer I’d need?
It’s approx 5-7 years old. Many thanks
-
3282BF77-5F5E-4487-B42F-7DF6E246162B.jpeg
475.1 KB
· Views: 17
-
4638F9A1-3F12-4707-A022-EAC658547D6B.jpeg
510.4 KB
· Views: 15
Probably 3 options available:
- Speak to John Lewis customer service (I believe the taps could be made in Italy)
- remove insert/cartridge, and take to merchants/diy chain
- renew the tap instead of faffing about
good luck
Esteemed
Plumber
Subscribed
Even if you found the make it wouldn't help much in identifying the cartridge.
It's probably just a standard cartridge that you need.
You'll have to remove the handle first and check the number of splines on the end and length of shaft, then get some from Screwfix or similar.
If the Screwfix don't match there are loads of suppliers online, just search Ceramic tap cartridges.
Or a local independant plumbing supplier.
https://www.NoLinkingToThis/c/bathr...agedredirect-_-plumbing-_-ceramictapvales#_=p
Reply to John Lewis ceramic mixer tap washer replacement in the USA area at PlumbersForums.net
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...