IPSWICH Heatrae megaflo (unvented) problem

Post new thread

Discuss IPSWICH Heatrae megaflo (unvented) problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

magicman

Heatrae sadia megaflo is showing a visible flow through the tundish.

The water is stone cold through the tundish.

Combination valve has already been replaced.

Recharged cyl countless times.

Cheers
 
Status
Not open for further replies.

Reply to IPSWICH Heatrae megaflo (unvented) problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Bettyboo
Megaflo , pressure relief valve and shower dripping
Morning All I have a Megaflo unvented cylinder . Water had been dripping into the tundish so I tried to recharge the air gap, but when I went to...
Replies
1
Views
432
Chuck
C
B
Noise from 8-Bar filling valve (Megaflo)
In our sealed Megalo system, when hot water tap is used (say in bathroom shower) the megaflo is taking in some fresh water, I guess to compensate...
Replies
4
Views
389
BenH
B
E
Loss of Hot Water Pressure to Shower
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
345
John.g
J
C
Ariston Classico HE STD 150 unvented cylinder leak
Good evening, I'd like your opinion on something that is worrying me please: my landlady's plumber replaced the bottom/night element of my...
Replies
2
Views
487
catwin
C
O
Recharging Air Gap on MegaFlo CL300
Hi. I replaced the Pressure and Temperature relief valve on my MegaFlo CL300 (I had thought it was dripping but it turns out the overflow drip...
Replies
2
Views
489
OMS2000M
O

Newest Plumbing Threads

Back
Top