Discuss I want to start a boiler service/install company where do i start? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I'm wondering if our red is on the plonk tonight, on a different planet??:)
I had a picture in my head of a plane taking off and heading North West with 'Aylesbury Plumbing & Heating' painted on the side.
 
I know I don't have to be qualified in Northern Ireland to do this work but I think this would give me the edge over the rest. If I did OFT 50 - Domestic Oil and OFT 105e - Domestic /Light Commercial Oil Firing Installation Course would I be right in saying that I could service and install oil boilers?
 
You need oft50, oft101, oft105e and oft600. Talk to David at CCTS. But then you'll have the tickets and no experience. So you'll need to find someone you can phone when you're stuck.

You'll also need all your test equipment which needs to be calibrated annually.

Plus insurances etc.

Thereabouts in Down? I can point couple of existing companies your way, save you some money.
 
It's a free market so if you get your qualifications you can legally trade however the piece of paper will not tell you all you need to know to complete the most basic boiler service.

I am in the South of Ireland and see lots of N.I. reg vans driving over 100 miles to do oil boiler services for less than half what I charge, some call it competition I call it desperation.

I had four jobs booked in today, only did one the customer said he was using a lot of oil 1,000 litres per month last year he used 1,500 litres up to April.

Find the fault, fix it then deliver two lots of very bad news (my bill being one), he is now back to using the expected amount of oil for a 4 bed house.

Far as I know the N.I. market is flooded with oil service technicians, Phoenix are not helping with their special offers.

Have fun.
 
Status
Not open for further replies.

Reply to I want to start a boiler service/install company where do i start? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
244
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
329
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
291
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
560
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
327
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock