Search the forum,

Help removing Hatria toilet seat cover.

Post new thread

Discuss Help removing Hatria toilet seat cover. in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

E

Evaldas

Messages
2
Hi there. So i need to change the Hatria toilet seat cover, but i cannot take it off the toilet so easy. I found few hidden screws in the hinges and unscrewed them, but the hinges only got loosen and that is where i am stuck. I add some photos. Anyone could help? 8F7825DE-1DDA-4B9E-BE68-D832A8F0282C.jpeg356160FD-33DC-4526-B220-F62BC4F3D8FD.jpeg9F1243AF-878C-43E6-850B-9912682A68A7.jpegC2AFECB2-E8D2-4820-929C-341C588523C1.jpeg
 
Should just pull up if you don’t want the seat you could try using a flat bladed screwdriver to help it start moving between the circle and the hinge be careful
 

Reply to Help removing Hatria toilet seat cover. in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
190
dreikher
dreikher
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
oz-plumber
O
B
    • Friendly
Posting a thread as until now I've only read the forum
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
128
turnpin
turnpin
Creating content since 2001. Untold Media.

Newest Plumbing Threads

British Standards in Tiling BS5389
Electricians' Talk
Tilers Forums UK
Tile Forum
TilersForums.co.uk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock