Search the forum,

Help removing Hatria toilet seat cover.

Discuss Help removing Hatria toilet seat cover. in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

E

Evaldas

Messages
2
Hi there. So i need to change the Hatria toilet seat cover, but i cannot take it off the toilet so easy. I found few hidden screws in the hinges and unscrewed them, but the hinges only got loosen and that is where i am stuck. I add some photos. Anyone could help? 8F7825DE-1DDA-4B9E-BE68-D832A8F0282C.jpeg356160FD-33DC-4526-B220-F62BC4F3D8FD.jpeg9F1243AF-878C-43E6-850B-9912682A68A7.jpegC2AFECB2-E8D2-4820-929C-341C588523C1.jpeg
 
Should just pull up if you don’t want the seat you could try using a flat bladed screwdriver to help it start moving between the circle and the hinge be careful
 

Reply to Help removing Hatria toilet seat cover. in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
129
Stigster
Stigster
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
304
Chuck
C
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
ShaunCorbs
ShaunCorbs
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
230
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock