Search the forum,

Discuss Help identifying broken "ceramic" part found in toilet bend in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hi all,

Hoping for some help to identify this - images attached -

  • I found this in the bowl of my wall mounted toilet in the upstairs bathroom
  • geberit parts but installed by previous home owner
  • The toilet works and there’s no obvious external leak or smell
  • I’ve got 2 kids so not impossible it’s from elsewhere but it looks like something that’s been exposed to liquid for a long time
My guess is it didn’t come from the cistern as it’s too big to travel down unnoticed and feels like ceramic - so more likely from just after the bend.

We had some work done two years ago to fit a new en-suite toilet toilet on the same system so could be from that. In general though most of the system has been looked at recently.

Any ideas before I start pulling tiles off the wall would be really appreciated - again right now the system works fine as far as I can tell and not sure if this actually needs fixed at this point

Cheers

John


Toilet1.jpg
 
The other thing it could be is tile grout.
Tilers have caused many issues pouring the the bucket of water they use for cleaning up grout down drains.

I wouldn't go as far as taking tiles off the wall if everything is working correctly. If you want some piece of mind, hire someone with a drain camera to inspect the drain beyond the pan
 
thanks guys - Oz and co, these responses have me wonder if the builders and painters used this toilet dispose of the water used to wash paint brushes and plastering tools etc --- maybe it's a build of of that..?
Main thing is, assuming things keep working, I won't be ripping the bathroom apart this weekend (and wife and kids assume I will be so are off out) so instead I'll be sitting in front of the telly.
Cheers guys - will shout if things go wrong
 
Cheers Pal,
Enjoy your weekend - be f-all on tv due to being so close to Xmas.

You could always watch the Aussies v India test match in Perth.

I know - you being a Pom - much the same as me being an Aussie, we support any team playing against each other.

I would go for any team playing England much the same as you would go for any team playing Australia.
 
Grout and / or adhesive that had water flowing over it while still soft to give the shiny appearance. As to ripping the place apart... "if it ain't broke"...
 

Reply to Help identifying broken "ceramic" part found in toilet bend in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Replies
3
Views
561
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
414
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
224
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
296
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
532
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock