Gas pipework test rig?

[macka09]

hi folks. What sort of rig do you all use to to air test gas pipework? Cheers

 

[DXCross]

I use something not too dissimilar to this from screwfix
https://www.NoLinkingToThis/p/baile...VqZPtCh1YdgRfEAQYAiABEgKCrvD_BwE&gclsrc=aw.ds

Just hook up my electronic manometer instead of theirs and have an isolator on the pump

 

[Scott_D]

A speed fit tee
One side onto the Pipework
One side has a test point
One side has a 1/4 turn valve to blow into

 

[Chalked]

This one.
Tyre valve fits into a 15mm comp fitting.

 

[Chuck]

This one.

You appear to be air testing at 3 bar (gauge). I'd limit the maximum pressure to 0.5 bar (gauge) with anything above that done using a hydraulic test.

 

[king of pipes]

Everything you need is available from Bes online for testing Gas and Water as below . Kop