Search the forum,

Discuss Finding valve head replacement for filling loop? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hello,

One of the black levers on my filling loop under the boiler has stopped working (when I turn it it's not opening the valve and no sound of water coming through). I think I just need to unscrew the black lever and fit a new one, but I can't seem to find one when I search online. I've tried searching for 'valve head', 'valve lever', 'valve tap'. Can anyone point me in the right direction?

I've added a photo here, it's the black one around center of the picture: Valve head filling loop

Thanks
Martin
 
Filling loop
 
https://www.NoLinkingToThis/p/r24-f...VyJTVCh3ezgLbEAQYASABEgLSoPD_BwE&gclsrc=aw.ds

If you need pressure in your boiler now though, you can remove the black head and turn the valve underneath using some pliers or an adjustable spanner.

You could also remove the filling loop and replace with top up mate from flow flex so you never have to worry about pressure again. Sorry @Rob Foster, beat you to it :p
 
If you need to use it today then remove the Black handle and you might find a square end on the shaft you can grip and turn.

Typing at same time I guess
 
Its the big launch this week , we are in heating and plumbing monthly etc.all help well recieved. Rob Foster ...centralheatking

0C075000-7C76-45F0-939A-9AAD602319DA.jpeg
 
As above depends on type and would probably need to replace it, until then you might have a hot washing machine valve under sink not in use and they Levers fit some
 

Reply to Finding valve head replacement for filling loop? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

If you are qualified to do a Gas Safety check on a property I assume that entails checking the boiler. If, when checking a Combi, you notice the...
Replies
9
Views
290
Hi Folks, Where is the place to order a Vaillant filling loop, please? I looked around on the net but can't seem to find it as a kit. I'm not...
Replies
3
Views
126
Hi all I had a new bathroom fitted about 4 months ago and all was fine until about a week ago. But now when I turn the lever to run the rain head...
Replies
4
Views
192
Hello, I want to change the system fill valve, but I’m struggling to dismantle the existing toilet to access underneath the tank, I’ve added some...
Replies
4
Views
490
In our sealed Megalo system, when hot water tap is used (say in bathroom shower) the megaflo is taking in some fresh water, I guess to compensate...
Replies
4
Views
364
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock