Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Cold Radiator in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

Centurion1

Hi all,

I have recently refilled my hot water & central heating system after fitting a new 2 port valve. All of the radiators are hot with the exception of the one in the kitchen downstairs, I have bled them all so am clueless as to why this one rad remains cold? Any ideas??

Regards
 
try shutting down all the other radiators, and see what happens. hopefully you will have an airlock, and the above procedure will cure the problem.

good luck
shaun
 
Status
Not open for further replies.

Reply to Cold Radiator in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Sorry if question already answered in previous posts, but I can't find a solution to the below: We recently moved house to a new home that...
Replies
7
Views
511
Hoping somebody can help, So, in a nutshell… Standard 90s Westbury home – condensing boiler, pump, wall thermostat, etc etc... Normal, common or...
Replies
8
Views
575
Hi all. I noticed this winter my living room rad only get hot in the top half. Radiator is 1600mm(DP SC) double panel single convector. System...
Replies
1
Views
441
Hi all, Looking for some advice please. Got a building, all one level with 7 radiators. 3 individual ones in separate rooms then 4 radiators...
Replies
2
Views
309
Hi All, In Dec 2023 I had my annual boiler service and asked the plumber to change 2 radiator valves as the radiator in the toilet downstairs was...
Replies
7
Views
505
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock