Search the forum,

Can anyone help identify this shower cartridge?

Post new thread

Discuss Can anyone help identify this shower cartridge? in the USA area at PlumbersForums.net

I

IHaveALeakyTub

Messages
4
Hello,

I have a bathtub faucet that has started dripping. I read online that the best thing to do to fix that problem is to replace the cartridge in the handle. I took it apart and got the cartridge out, but could not find any markings or branding to order a new one. I have asked a few local plumbers to see if they could identify it and so far nobody has seen anything like it.

The handle does not have any markings or branding either. A different whirlpool in our home has a Danze faucet so I assumed that maybe this one was the same and I ordered two different Danze cartridges (DA507348N and DA507107) but neither of them fit in the valve.
 

Attachments

  • 608491758.jpg
    608491758.jpg
    35.5 KB · Views: 10
  • 608491788.jpg
    608491788.jpg
    44.8 KB · Views: 11
  • 608491867.jpg
    608491867.jpg
    52.2 KB · Views: 11
  • IMG_2671.jpg
    IMG_2671.jpg
    97.1 KB · Views: 12
  • IMG_2674.jpg
    IMG_2674.jpg
    107.6 KB · Views: 11
  • IMG_2675.jpg
    IMG_2675.jpg
    98.9 KB · Views: 14
  • IMG_2676.jpg
    IMG_2676.jpg
    101.7 KB · Views: 15
  • IMG_2677.jpg
    IMG_2677.jpg
    122.6 KB · Views: 13
  • IMG_2679.jpg
    IMG_2679.jpg
    46.8 KB · Views: 11
  • IMG_2680.jpg
    IMG_2680.jpg
    108.9 KB · Views: 8

Reply to Can anyone help identify this shower cartridge? in the USA area at PlumbersForums.net

Similar plumbing topics

C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Timmy D
T
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Lou
Lou
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
198
SimonG
SimonG
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
195
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum UK
Electricians Talk
Tiling Advice Live
Tilers Forum
Electrical Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock