Search the forum,

Discuss any gas safe engineers in bristol help with portfolio??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
31
really eager to get gas safe registered and do my course in 2014 but stuck on having anyone to sign my work off. got my level 2 plumbing and would really appreciate if anybody could help me out please?????? thanks!!
 
Hi Tom,

I'm based in Swindon, but moving closer to Malmesbury in the spring.

I very occasionally do work your way, if you get really stuck, you're welcome to come to Swindon and join in with some boiler installs/servicing.

Dom
 
Hi dom, thank you for your reply. Well that's brilliant to offer like that, and I am mobile. Just on the verge of putting a deposit down for a course but nightmare setting it up around full time work! But hope it pulls through so I can start my course this year, really appreciate that so will definitely keep you in mind and will let you know, cheers again,
tom
 
was looking at either gas flare or weston gas centre, any good up there? wana put a deposit now but nightmare trying to get set up with a ga sengineer around a full time job!
 
Status
Not open for further replies.

Reply to any gas safe engineers in bristol help with portfolio??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
520
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
334
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
176
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
304
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
391
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock