Advice needed. Issues with underfloor heating and hot water system for new build

[happyflyer]

Carrera, this must be a record, 140 posts and still not fixed, you need a man who wears his underpants on the outside.

 

[Carrera]

Carrera, this must be a record, 140 posts and still not fixed, you need a man who wears his underpants on the outside.

Xmas hols did not help, plumber should be back later this week with consultant and fresh look! Will give an update then if still interested.

i am pushing for low loss header set up, when I spoke to him, he said when required, they use the valliant ones, any they any good? Before I have a further conversation with him later this week when he brings a consultant in to have a look.

 

[Howsie]

Tbh you shouldn't be pushing for anything apart from a working system. My advice would be to stay away from specifying as if it doesn't solve it you he's only doing what you have asked.

This should be his problem to own and run with.

 

[Carrera]

Tbh you shouldn't be pushing for anything apart from a working system. My advice would be to stay away from specifying as if it doesn't solve it you he's only doing what you have asked.

This should be his problem to own and run with.

Fair point

 

[chris watkins]

Anyways a LLH is a LLH, if you know what I mean it is just a large pipe with connections.

 

[happyflyer]

Carrera,

Please take notice of what Howsie says, let the consultant do his job, don't you suggest anything to him, don't even mention you have be on the forum, then you don't need to tell the consultant what suggestions have been made here, personally I wouldn't want all and sundries ideas of what's wrong when they haven't seen the job.

If the consultant is any good he will sort it out, I have not read more than 10 of the post, why because if you haven't got it fixed after 20 posts then its going nowhere, a good heating consultant should come in the house and should have the answers to your problems before he leaves, if he doesn't sack him too!

To fix your problems, we need to be stood in front of the problem, not miles away, it can be done sometimes, but not always.

Tony

 

[Carrera]

Carrera,

Please take notice of what Howsie says, let the consultant do his job, don't you suggest anything to him, don't even mention you have be on the forum, then you don't need to tell the consultant what suggestions have been made here, personally I wouldn't want all and sundries ideas of what's wrong when they haven't seen the job.

If the consultant is any good he will sort it out, I have not read more than 10 of the post, why because if you haven't got it fixed after 20 posts then its going nowhere, a good heating consultant should come in the house and should have the answers to your problems before he leaves, if he doesn't sack him too!

To fix your problems, we need to be stood in front of the problem, not miles away, it can be done sometimes, but not always.

Tony

Thanks happy flyer for your help in working through this

 

[happyflyer]

Carrera,

Sorry I could not have helped you sooner and saved you some time, I have not been posting for some time, hope now you can get on with putting it right-right, you know where
I am if you want me.

Tony

 

[buckley plumb]

is it a wrongly teed rtn problem

 

[happyflyer]

No not at all