Discuss Seal soil pipe gap/ downstairs toilet in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
- Messages
- 34,365
- Solutions
- 2
Foam Sealant Joint Backer Rod - Sealant Supplies Ltd
Foam Sealant Joint Backer Rod (13mm) is non-absorbent compressible grey polyethene foam material.
www.sealantsupplies.co.uk
- Messages
- 10,442
Evening. There should already be a rubber seal in between the 2 pipes. Are you worried things may come out of it?
Harvest
Harvest
I noticed a slight smell and also cold draught.. just wanted to see if it is OK too seal it and that would help
- Messages
- 10,442
No problem. The link @ShaunCorbs has sent above should do the trick.
Reply to Seal soil pipe gap/ downstairs toilet in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Hello All,
Was looking for some innovative ideas from you all.😊
I’m renovating a bathroom in a flat.
The soil, hot & cold water pipe runs stops me...
My soil pipe on the downstairs toilet seems to be partially blocked. Now I know it can be rodded but I was thinking of another way.
With the...
Hi! Totally inexperienced DIY newbie so bear with me for descriptions! Pictures hopefully help.
I’m trying to remove an unused downstairs toilet...
Trying to connect up new 40mm waste into the old soil stack (which would be an absolute pain to remove), it's all Osma pipe, from the 70s...
Hi - I'm not an expert but wondered if anyone might be able to assist. I've replaced an old toilet with a new one. I've used the same water inlet...
Newest Plumbing Threads
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 0
-
Instructions say to apply glass cement to rubber washer. Can I use silicone?
- Started by JM Tiling
- Replies: 1
-
How do I remove the copper pipe from the plastic connector?
- Started by JM Tiling
- Replies: 2
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 1
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 2
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8