Search the forum,

Worcester 26/32 lifting capacity

Post new thread

Discuss Worcester 26/32 lifting capacity in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

johng22

I need to re-site my existing fuel tank which is currently gravity fed, my new site will mean that the bottom of my oil tank will be approximately one metre below my boiler pump. Will my boiler be able to cope with lifting the oil this height and if so how do i get the oil to reach the pump initially with the height difference? My boiler is a Worcester Danesmoor 26/32.
 
Status
Not open for further replies.

Reply to Worcester 26/32 lifting capacity in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Could the BAXI commercial boiler parts/flue melt ?
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
1
Views
48
ShaunCorbs
ShaunCorbs
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Lou
Lou
C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
273
pritchardsplumbing
P
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
260
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
236
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum
Electrical Advice | Electricians Blog
Tiling Tools for Beginners
Tiling Standards BS5389
Electricians' Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock