Search the forum,

Discuss want to see something cool? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Woah I can imagine. They synchronisation is incredible. All while playing instruments. Very impressive I must say
 
What sort of **** were u looking for when u got this? Mind boggles as to what you typed in to google?
 
This is what you call synchronisation with no rehersal.
If you are lucky you might see one or two this winter. It really is something else.

[video=youtube;eakKfY5aHmY]http://www.youtube.com/watch?v=eakKfY5aHmY[/video]
 
Amazing and beautiful. Would love to see it in real life.

I was driving home a few months back, (I live in the sticks) and there was this chase going on over a valley between a bird of prey, probably a Kestrel and a smaller bird. Real amazing aerobatics. So I parked the van, and watched them. I'm no birdwatcher but it was pretty incredible. Sadly for the prey, he copped it. Gave it a bloody good run for it's money though.
 
I've only seen it twice. Once when i was young and again about 4 or 5 years back.
It really is some display.

Here is another clip with a hawk trying to get a feed
[video=youtube;V-mCuFYfJdI]http://www.youtube.com/watch?v=V-mCuFYfJdI[/video]
 
This happens every year above an oil boiler customer of mines house, the noise is incredible , the bird ****, not so...

they all sit in the trees for a while, them something starts them all off it goes on for about 10 minutes then they sit back in the trees again until it happens again. Around February/March time if I remember.
 
Last edited:
Awesome that tamz. Really beautiful. I don't suppose you know what piece of orchestra that is? The wife would like to know. The starlings vid
 
Status
Not open for further replies.

Reply to want to see something cool? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
187
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
197
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
90
The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The front right corner shim is 5/8", the left front corner is 3/8" shimmed, with shorter shims under left middle and right rear corner. The pan perimeters...
Replies
5
Views
131
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock