You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
bottle
A bottle is a narrow-necked container made of an impermeable material (such as glass, plastic or aluminium) in various shapes and sizes that stores and transports liquids. Its mouth, at the bottling line, can be sealed with an internal stopper, an external bottle cap, a closure, or induction sealing.
Hi Guys
Not sure if this is the correct area to post?
Firstly, i'm not doing this work myself but I need to get a question answered as it impacts an outdoor kitchen slab i'm going to pour and need to run pipe or conduit under it.
Having a commercial LPG griddle installed on the outdoor...
Hi,
We are designing and building cooking gas bottles with electronics controlled valves. These are for kids camping chalets. Its purely a safety feature because its kids. As you can tell, there is no big market for this product, its just to get these kids out camping.
System description:
So...
Just about to start on our new main bathroom and have chosen a wall mounted sink with decorative black bottle trap which heads into the wall. As I have multiple wastes going into one stack pipe I would like to connect the sink waste into the bath waste feed to the stack… I’m worried about...
Hi everyone,
I am planning to renovate my small en-suite and to replace the current standard basin with a counter basin.
I have some doubts regarding the trap, I didn't have the chance to remove the basin yet (it's full of sealant) but from what I can see from the camera of my phone, current...
Anyone know if there is a bottle trap connection tube minimum length?
(The pipe between the trap and the basin)
I would like mine as short as posible so the trap is less obvious.
Just wondered if I could cut it really short or does there have to be minimum drop distance before the trap for good...
Hello, I want to buy this basin and the bottle trap but I don't know if they will fit together
If anyone knows anything about fitting these kind of things please help me! Thank you all
Basin
Kyoto Large Rectangular Wall Hung Basin | Online At Victorian Plumbing -...
Hi, I need to install some bottle vents in the flow and return of the central heating pipes.
last time I fitted tee’s to the 22mm pipes, then a valve then the bottle vent. So the bottle vent was only 12cm above the pipe, this resulted in air being dragged in.
I’m going to refit them today as...
Hello!
I normally fix things at home and opening a basin trap is a quite easy thing, but I don’t sleep to find the way to open the bottom part of this metal basin trap that has no grip at all.
Any clues?
It’s a Hudson Reed model: Elizabeth.
Thanks on advance!
Pd: I already tried some WD40 with...
Morning, I’ve had problems with air in my central heating system.
It’s always built up air (it’s got inhibitor) and needing buleeding regularly. I’ve fitted automatic bleed valves on most of the radiators, which seems to solve the air building up and causing problems.
Bleeding it after it’s...
I need 3 auto air value for my CH system. Any suggestions to a good quality 15mm product. I was going to buy the unbranded screwfix ones but some of the reviews are terrible.
Thanks folks.
Hi, I have a 1970s vintage bottle trap waste under the sink and had to unscrew the bottom cap to clean out a blockage. I noticed the rubber seal on this cap which appears to be a 50mm or 2 inch flat o-ring affair is starting to deteriorate.
can anyone recommend a work around or replacement...
Guys,
I am just changing my own heating system to a sealed system (not the hot water, just heating) because I added a circuit and needed to move the pump, now the Vent and F and E tank are on the pumped side of the pump.
Expansion vessel sized and fitted, and open vent sealed off with a...
Hi there,
I’ve had a small leak from my bottle trap in the bathroom sink after the tap is turned off, which I understand is a bottle trap issue. It’s quite old, so I bought a new one from Screwfix (32mm).
However when I tried to replace it, it doesn’t fit. The new bottle trap does not fit on...
Hi,
I have a question about the implications of running multiple bottle traps in series - say for example 6 bottle traps between a sink and drain, what would I need to do to make this work (will be used on an isolated system for experimentation)
I understand that without venting in between the...
Having just replaced my bathroom basin tap, I thought I would check and clean all the outlet fittings and seals, including a plastic bottle trap (don't know what make, but it was from B&Q about 5 years ago). Now, water runs away very, very slowly - just a trickle. Loosening the bottom of the...
I have an 11kg Alugas refillable gas bottle that I want to connect to a HeatSource propane heater and a Primus Tupike camping stove. I have never used any type of gas bottle before so have no idea what conncetors/valves/pipes/regulators to use. All these items will be fitted in a camper van. Ive...
Or wine for the ladies. That's me obviously because I'm on my second bottle at 8pm. Wallets on the side, knock yourselves out. No snacks tho. Don't take the ****!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.