Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Tee into existing Rad flow & return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
35
Hi to all.
I want to add another radiator in the through lounge as the existing radiator is stuck under the window at one end of what is quite a long lounge. One end never gets warm so I want to add a further radiator in what is this cold spot. Behind the wall I want to put the rad on is the kitchen radiator - is it possible to tee off the 15mm flow and return on this rad and put my rad on the other side of the wall? I have a sealed combi system and all radiators are fed from above. I can't take it off the 22mm feed above as it is under a fitted wardrobe!!
 
Status
Not open for further replies.

Reply to Tee into existing Rad flow & return in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
209
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
542
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock