Discuss REGULAR BOILER HELP (HEADER TANK IN LOFT) in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Hot tap or cold it's a mixer tap
If it’s a kitchen sink tap and it’s a mixer. Simple fix. Open the hot tap put your hand over the outlet, then open the cold tap. This should force the mains water back into the hwc and blow the airlock back into the hwc. Then (the messy bit) shut the hot tap then the cold.
Reply to REGULAR BOILER HELP (HEADER TANK IN LOFT) in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Hi
I seek some advice on replacing an existing regular boiler.
I currently have an old Potterton 10-16 Netaheat electronic, which is around 35...
For reasons that I won't go into.
Is it possible to control the water flow to a cold water header tank without having a ballcock in the header...
Hi,
I am looking for a bit of advice. Our Gledhill hot water tank was installed incorrectly 18 months ago and has been sending bubbling hot...
Hi
There was no shut off valve on the tank feed to the hot water cylinder, and I needed to move a couple of hot water pipes, so I shut off the...
Hi all
I have a problem with my hot water header tank getting warm water into it from the bottom of the header tank (not the hooked...
