Search the forum,

Discuss New scrap laws. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

midlands based

Anyone know exactly what the new laws are regarding scrap. Im hearing that we wont be able to weigh in at all after next week.
 
Good scrappy dealers have been doing this for some time now

You must produce photo id, your weighed in metal gets paid for via bank transfer or via your bank card.

Its a good scheme and should lead to fewer metal thefts unless your local pikies have access to a semi friendly local bank account holder to channel their collections through.............

Russ
 
Last edited by a moderator:
Often ponder taking van load of copper over to france and retuning loaded up with booze, but bone idleness and not knowing the rules in france prevent it getting any further than that.
 
Often ponder taking van load of copper over to france and retuning loaded up with booze, but bone idleness and not knowing the rules in france prevent it getting any further than that.

Monsieu, je suis ave un grand colletion of copper pour vous, en return pour mucho beacoop bottles du vino

ave vous beacoup vino pour le swap?

Les copper est tres valuble en beucoup franc en angleterre, en vous vino est real cheapo en france so vous needs beucoup vino to make it worth my time................


Sounds like a simple enough transaction, don't know why you think its complicated......pmsl
 
Last edited by a moderator:
Monsieu, je suis ave un grand colletion of copper pour vous, en return pour mucho beacoop bottles du vino

ave vous beacoup vino pour le swap?

Les copper est tres valuble en beucoup franc en angleterre, en vous vino est real cheapo en france so vous needs beucoup vino to make it worth my time................


Sounds like a simple enough transaction, don't know why you think its complicated......pmsl

Fringlish?
 
PS grew up on magic roundabout (or at least the Jasper Carrot version)

oh and Mr ben

and as if by magic the shopkeeper appeared, that shopkeeper was a right weirdo if you ask me
 
Im aware of the no cash thing and we are already set up with the scrappy but just heard that it was changing again so nobody can weigh in unless you got one of the new council licenses.
 
Im aware of the no cash thing and we are already set up with the scrappy but just heard that it was changing again so nobody can weigh in unless you got one of the new council licenses.

Bet that costs a few quid to get then, have to spend money to get licence to then be able to sell it for scrap.

I wonder if selling my gold will have the same laws attached?
 
About £700 ive heard. And that is per council so the tatters cant just work anywhere. Id say that if anyone is after a transit pickup there will be a lot on the market very soon.
Bet that costs a few quid to get then, have to spend money to get licence to then be able to sell it for scrap.

I wonder if selling my gold will have the same laws attached?
 
Is this the waste carriers license? It's about 150 for three years, I think. If you do a search there's been a couple of threads on this.
 
So how does this work?
Let's say your doing a job in Nottingham and have always take your scrap back to your local scrap dealer, so in my hypothetical case, Coventry.
Do you have to keep records of where the scrap came from and are you allowed to take scrap from one borough or Council and sell to another scrap dealer in another borough or Council.Or would that require separate licences to do so?
 
I took a load this week, all be it same county, and on the new paperwork they issue is a space for the waste carriers license number. But I think the waste carriers license is individual specific.
 
Its not the waste carriers license its something totally new. From what i have heard we wont be able to take scrap in at all. I will look further into this and see what i can find out.
 
Can't find anything online.There's one or two "new scrap metal laws" for the 1st October, and 1st December online for various councils, but just received 404 errors from respective webpages.
 
They didn't say anything when I was there. With the last lot of changes they had big posters up and the lads were telling everybody about it as well.
 
Its not the waste carriers license its something totally new. From what i have heard we wont be able to take scrap in at all. I will look further into this and see what i can find out.

I friggin hope not.I've got an old 1930's copper back boiler that's to come out when the wood burner goes in.
Was hoping to recoup some of the money spent on the woodburner by selling the very heavy backburner to scrap.
 
Makes no diffrence been in tyne&wear for over a year. Police only bother u if u have a transit tipper.
 
Bet that costs a few quid to get then, have to spend money to get licence to then be able to sell it for scrap.

I wonder if selling my gold will have the same laws attached?

It would if commemorative nameplates on war memorials were made of gold.
 
It's only for scrap dealers, one per council. I was talking to the guy that takes my boilers and rads away the other day.
 
AAAAAAARRRRGH worst point of all......my wife will know how much I got for the scrap if paid into bank:(
;)
 
Status
Not open for further replies.

Reply to New scrap laws. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
507
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
331
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
413
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
184
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
249
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock