Search the forum,

new boiler just in, HW from shower goes cold after (5-10 mins),

Post new thread

Discuss new boiler just in, HW from shower goes cold after (5-10 mins), in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

K

kareena2b

Messages
2
bae.jpg
 

Attachments

  • ba.jpg
    ba.jpg
    254.3 KB · Views: 8
  • ba2.jpg
    ba2.jpg
    240.7 KB · Views: 8
the HW hose is kinked & behind cold one, access limited, do I need to rip out bath to change hose, flats are old, bath on floor above boiler-no other taps affected or is there an issue with boiler
 

Reply to new boiler just in, HW from shower goes cold after (5-10 mins), in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
275
oz-plumber
O
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
180
Lou
Lou
S
Porcelanosa KRION Attica screen 1.2m, anyone?
I have a brand new, unboxed shower/wet room screen from KRION purchased from Porcelanosa UK. It is the Attica 1 model, as shown in the attached picture from their catalogue. Like on this image ->...
Replies
0
Views
102
Sebastian T
S
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
180
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Advice
Tiling Standards BS5389
UK Tiling Forum
Tiling Blog
TilersForums.co.uk | UK Tiling Forum - Est 2006
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock