Search the forum,

Discuss low flow rate, undecided on options. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hi I have an old property with a Low flow rate coming in from Mains. Old black imperial pipe from a long run.
This is not a simple job to replace so looking for other options.

It currently has 5 bar on standing but drops off as soon as one tap or shower is used. <1 bar.

The property is being renovated to have 5 bedrooms 2 bathrooms, and another en-suite.
So the current setup is far from enough to run 2 showers, without it being a dribble.

I am looking at different possibilities from a 300L+ Accumulator or the same but with a charge pump.
Also a water pump with a break tank, such as the DAB E.SYBOX and E.SYTANK 500l.
It does sound a large amount, but large family and water usage.

I cannot see what the main differences are between the 2 apart from the motor will be supplying the loss in flow, or the stored water in the Accumulator.

What ideas are out there, thanks all.
 
Last edited:
Second option for me all day long

Accumulator won’t keep up with demand
 
Hi I have an old property with a Low flow rate coming in from Mains. Old black imperial pipe from a long run.
This is not a simple job to replace so looking for other options.

It currently has 5 bar on standing but drops off as soon as one tap or shower is used. <1 bar.

The property is being renovated to have 5 bedrooms 2 bathrooms, and another en-suite.
So the current setup is far from enough to run 2 showers, without it being a dribble.

I am looking at different possibilities from a 300L+ Accumulator or the same but with a charge pump.
Also a water pump with a break tank, such as the DAB E.SYBOX and E.SYTANK 500l.
It does sound a large amount, but large family and water usage.

I cannot see what the main differences are between the 2 apart from the motor will be supplying the loss in flow, or the stored water in the Accumulator.

What ideas are out there, thanks all.
I am interested in your problem, but I think we on UKPF need more
info.
1. Details of your supply...length, utility etc.
2. Your aspirations when it is sorted out
3. Future proof it ...tell us what you plan
4. Budget ...important
5. Are you the owner ?
centralheatking
 
I have come across several potential customers who have the same problem as you. They often come to me having tried all other options. A Salamander Home Boost will not fix your problem. A ShowerPowerBooster will not fix your problem. I normally get involved only after a customer has fitted an accumulator and still not fixed the problem.

There are two solutions which will fix your problem.
1.0 Replace the pipe - expensive
2.0 Change to an open vented system with a storage tank in the loft.
A cold water storage tank allows you to store cold water in your home so when you do want a bath you have all the water you need and you can run more than one shower.
I visited a potential customer in Norfolk who after getting rid of her gravity system spent a fortune on a non vented system with an accumulator only to find her system failed her.
After fitting a gravity system please consider boosting your showers with a ShowerPowerBooster.
 

Reply to low flow rate, undecided on options. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
137
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
212
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
65
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
476
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock