Search the forum,

Discuss Is there a direct replacement for wirquin jollyfill please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Phil999

Hi
Have a cistern with a jollyfill valve and flush

The inlet pipe valve part on the rhs connected to the water inlet is leaking
on the pipe\ flexihose
Is there a direct replacement of another make that can fit.
Also there is a flush part that connects to the dual button do I have to replace that part as well, ie is it both parts I will need to replace
Thanks,
Phil.
 
Best, would be to remove the flush valve and fill. Then replace with one of these.
Fluidmaster Pro Universal Cistern Pack
Probably the best and most reliable out there
image.jpg
 
Status
Not open for further replies.

Reply to Is there a direct replacement for wirquin jollyfill please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
192
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
289
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
227
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
113
S
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock