Search the forum,

I am remodeling my kitchen and wanna choose a new kitchen faucet

Post new thread

Discuss I am remodeling my kitchen and wanna choose a new kitchen faucet in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Achilles

Achilles

Messages
4
I wanna buy a good quality faucet with a good price. I come across two similar faucets that I like. Does anyone hear about WOWOW and FORIOUS? Which one is better?
 
WOWOW FAUCET AND FORIOUS FAUCET
 

Attachments

  • wowow-brushed-nickel-kitchen-sink-faucet-with-pull-down-sprayer-4.jpg
    wowow-brushed-nickel-kitchen-sink-faucet-with-pull-down-sprayer-4.jpg
    93.6 KB · Views: 8
  • 71lqW62V+lL._AC_SL1500_.jpg
    71lqW62V+lL._AC_SL1500_.jpg
    116.3 KB · Views: 6
Quality and price typically trade off in opposite directions. If you want quality you need to pay more. If you don't want to pay too much, you won't get too much quality 🤔.
Look for certified products that meet your local regulations, preferably made in your country!
A quick Google doesn't reassure me
IMG_0389.jpeg
 

Reply to I am remodeling my kitchen and wanna choose a new kitchen faucet in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
112
Lou
Lou
C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
225
pritchardsplumbing
P
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Timmy D
T
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
441
FozzieBear
F
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock